Tigershark Custom Paintball Sniper Rifle

Well this was an interesting project. It took quite a bit of time to get it all to work together properly. Of all guns, I chose a Tigershark probably one of the worst stock pump guns out there outside of the Vulcan. The Tigershark is mounted in a wood stock. I couldn't use the shark trigger or any part of the grip frame so I just tossed it. I had to make the trigger mechanism. A pin through the stock holds the trigger in. I installed a spring in the stock to return the trigger forward and a trigger shoe. Trigger pull needed is less than 1/4" and auto trigger still works also. 2 steel pins through the stock hold the gun in place. It can be easily removed by removing the pins. After fitting everything together and making a plate to cover where the trigger comes out of the gun, the stock received a coat of primer and 3 coats of a hard matte black finish. I also added a bottomline with a quick disconnect adapter. Rifle is shown with the 16" 2 piece barrel and a 4x15 sight. It's nice and quiet, accurate, lightweight and hey.... I like the way it looks.

 
Shown with final revisions including microline