Bitty Paintball Launcher

You will notice that this one isn't painted or have the finishing touches yet. It is a smaller version of the Mini Launcher. Not only is it smaller and lighter, I also set it up to run directly from a remote or the bottom line on the marker which it is mounted.

Parts list

Note: This is only a reference for how I made mine. If you decide to do this yourself, you're on your own and completely responsible for anything that happens!

I assembled using plenty of teflon tape. I found I needed to really wrench on the fittings to get them air tight. I used PVC primer and PVC cement on all of the PVC joints. PVC Cement needs to dry overnight so I let it dry overnight. Failure to do so may result in some very undesirable results and possible injury. I always have some extra CO2 handy as air leaks are common on the first try and some of the joints may need to be re-sealed. Once it's air tight I primed and painted it. 
 

Finished launcher shown with remote attached. I wrapped it with camo netting that can easily be removed.